Start-Up; Installation And Teaching-In - HomeMatic IP HmIP-PS-2 Bedienungsanleitung

Start-up

5 Start-up
5.1

Installation and teaching-in

Please read this entire section before starting
the teach-in procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
To integrate the pluggable switch into your system and
enable it to communicate with other Homematic IP de-
vices, you must teach-in the device to your Homemat-
ic IP Access Point first.
To teach-in the pluggable switch, please proceed as fol-
lows:
• Open the Homematic IP app on your smartpho-
ne.
• Select the menu item "Teach-in device".
• Plug in the switch into the desired socket (see
figure 2).
• Teach-in mode remains activated for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (A)
shortly (see figure 3).
32