eeese Emma Bedienungsanleitung Seite 96

UK
Memory function
1. If the unit is unplugged directly or due to power failure, reconnect the unit to the
power supply and the dehumidifier will run with the mode prior to the shutdown.
The timer setting will be kept.
2. Press the power button to switch off the dehumidifier, and then press the power
button to switch it back on. The dehumidifier will run with the mode prior to the
shutdown. The timer setting will be canceled.
2. Switch off the dehumidifier and unplug the power cord. Then reconnect the power
supply and switch on the dehumidifier. It will run as factory preset mode the first time
you received the dehumidifier.
6. Cleaning the dehumidifier
When used regularly, the filter may become clogged with dust and particles. To ensure
the effectiveness of the dehumidifier, it is recommended to clean the unit at least every
two weeks:
96
Switch the device off and remove the plug from the socket
before cleaning.
Clean the housing with a soft, dry cloth. Vacuum clean
the air inlet and outlet grilles of the dehumidifier. If the
device is extremely dirty, use a mild cleaning agent.
Wipe the dehumidifier with a slightly damp cloth. Remove
the water tank and wash it by hand using a mild detergent.
Rinse it with clean water
Note: Do not spray water directly onto the unit.
Cleaning and user maintenance shall not be made by children
without supervision.
Cleaning the Pre Filter
1. Remove the pre filter frame from the back.
2. Wash the pre filter frame carefully in warm water,
use a mild detergent if necessary. (Max. 40°C)
Note: DO NOT wash the pre filter in a dishwasher.
3. Rinse the pre filter in clean water and let it dry
before reinserting it.
4. Fit the pre filter frame back onto the unit.
Note: DO NOT use the dehumidifier without
the pre filter in place.
MV-2567-03-2023 eeese-aircare.com © All rights eeese air care aps