Herunterladen Inhalt Inhalt Diese Seite drucken

Start Operations; Pre-Start Check - Fral FACSW22.0000 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

UK
A Green Light: indicates that the socket is correctly inserted in a power plug.
A Main Switch allows to choose among: OFF position (nothing works) – FAN position (only indoor fan works
in pre-set speed) – COOL position (the machine is cooling according with preset room temperature).
An Ambient Temperature Thermostat, located in the front control panel allows to choose the desired room
temperature with range 10-35 °C.
A Fan Speed Switch, also located in the front control panel, allows to choose among 3 different internal fan
speeds.
A Display PCB; this display indicates the number of hours of compressor working. When machine is in defrost
it shows "dEFr". When machine is in alarm, it indicates the type of alarm (see alarm table).
A GENERAL ALARM led; it's on if machine has an alarm (see alarm table).
A ON/OFF led; it blinks if compressor is waiting to start, it' on if compressor is running. It's off if compressor is
off (temperature in the room under the set point). In FAN mode, this led is always off.
An LPS ALARM led; it's on if machine exceeds the minimum value of low pressure.
An HPS ALARM led; it's on if machine exceeds the maximum value of high pressure.

4.3 START OPERATIONS

Machine is not designed to be used by people (also children) whose
physical, sensory or mental capabilities are reduced. Also people without
experience or knowledge of the machine can't use it.
People, described above, can use this machine only if there's someone,
responsable of their safety, which watches them and gives them
instruction regarding the use of the machine.
Children must be watched in order to be sure they don't play with machine.
This machine is designed in order to be used by experienced users or
trained in shops, light industry and farms.
People without experiences can use this machine only for a commercial
use.

PRE-START CHECK

Caution: before proceeding to start up, check that all the cover panel be
located in the proper position and locked with fastening screws.
M.FACSW22.0000-00 Multilanguage 07/04/2023
24

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis