Storage - TOOLCRAFT AP-1200 Original Bedienungsanleitung

15 Storage

Important:
– Store the compressor only in a dry location.
– Always store upright, never tilted!
1. Switch the power OFF.
2. Remove any inserted battery packs.
3. Turn the regulator dial counterclockwise (-) to set the outlet pressure to zero.
4. Remove any attached accessories.
WARNING:
Risk of bodily harm and/or damage to property.
See "14 Maintenance (Drain air tank/release tank pressure)" on page 31.
5. Release air pressure then drain any water from the tank.
6. Allow the product and all attachments to completely air dry.
7. Store the product in a clean, dry location.
32