Werbung
Verfügbare Sprachen
Verfügbare Sprachen
P
Outlet filter
Q
Motor filter
Q1
Foam filter
Q2
Microfiber filter
R
Fixing part of the motor filter
S
Power regulator
If the model of your appliance does not have the accesso-
ries described above, they can also be bought separately
from the Technical Assistance Service.
INSTRUCTIONS FOR USE
BEFORE USE
• Make sure that all products' packaging has been re-
moved.
VACUUMING FUNCTION
• Fit the hose unit to the vacuum cleaners air intake and fix
the hose turned to right side. (Fig. 1).
• To disconnect the hose unit from the vacuum cleaner,
turn the connection to the left side and pull out the hose.
(Fig. 2).
INSERTION OF ACCESSORIES INTO THE
APPLIANCE'S GRIP
• The appliance's grip is designed in such a way that it
allows the insertion of the following accessories (use the
combination that best meets your requirements):
• Extendible tube: designed to provide access to surfaces
which are out of reach and make floor cleaning comfort-
able, its length can be adjusted by using the adjustment
control. (B)
• Floor nozzle: specially designed for cleaning floors
(both rugs and carpets and hard floors), its base has a
retractable brush that can be adjusted to two heights for
greater efficiency on these floors. It is advisable to have
the brush out for hard floors and the brush in for rugs and
carpets.(A)
• Lance and multi-use brush: specially designed for
getting into cracks and difficult corners, brush especially
for textile surfaces. (N)
USE
• Take the length of cable required out of the housing. (M)
• Connect the appliance to the mains.
• Turn the appliance on, by using the on/off button. (G)
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Turn the appliance off using the on/off button. (G)
6
• Unplug the appliance from the mains.
• Retract the cable by pressing the roller cable button and
guide the cable into the appliance. (F)
• The cable housing means you can remove and have
available the required length of cable for working with the
appliance, preventing accident risk situations.
• Clean the appliance.
CARRY HANDLE/S
• This appliance has a handle on the front part of the body,
which facilitates comfortable transportation (H).
PARKING POSITION
• This appliance has its own parking position for comforta-
ble and straightforward storage.
• You can use the parking aid on the back of the vacuum
cleaner sliding the hook of the brush into the recess on
the rear of the appliance. (Fig. 3).
CLEANING
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
• Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
• Never submerge the appliance in water or any other liquid
or place it under running water.
EMPTYING THE DUST BOX
• Empty the dust container after each use of the vacuum
cleaner.
• Disconnect the hose unit from the vacuum cleaner, turn
the connection to the left side and pull out the hose. (Fig.
2).
• Disconnect the dust box from the appliance by pressing
the extraction button (J). (Fig. 4).
• Open the lid of the dust box and empty the contents into
the appropriate waste disposal receptacle. (Fig. 5).
• Check the condition of the motor filter.
• Close the lid of the dust box.
• Attach the dust box to the appliance.
• Fit the hose unit to the vacuum cleaners air intake and fix
the hose turned to right side. (Fig. 1).
CHANGING THE FILTERS
• Motor filter (Q): it is advisable to periodically check the
state of the filter, which should be cleaned/replaced after
every 50 hours of use.
Werbung
