Siemens TW86 Serie Gebrauchsanleitung Seite 11

▶ Repairs to the appliance should only be carried out by trained
specialist staff.
▶ If the power cord of this appliance is damaged, it must be re-
placed by the manufacturer, the manufacturer's Customer Ser-
vice or a similarly qualified person in order to prevent any risk.
▶ Never immerse the appliance, the base or the power cord in wa-
ter or clean them in the dishwasher.
▶ Liquids must not be spilled on the appliance plug connection.
Never use the appliance near water contained in a bath,
▶
sink or other vessels.
▶ Ventilate the appliance adequately.
▶ Never operate the appliance in a cupboard.
▶ Never place the appliance on or near hot surfaces.
▶ Never touch hot appliance parts.
▶ Allow hot appliance parts to cool down before touching.
▶ Only hold the jug by the handle.
▶ Only use the appliance with the lid closed and the limescale filter
in place.
▶ Never exceed the maximum quantities specified.
▶ To avoid injuries, only use the appliance for its intended purpose.
▶ Follow the cleaning instructions.
▶ Clean surfaces which come in contact with food before each
use.
Preventing material damage
▶ Only use the appliance with fresh, cold,
non-carbonated water. Never add milk,
ready-made drinks or instant products.
▶ Never operate the appliance when
empty or overfilled. Observe the water
level indicator.
▶ Leave the appliance to cool down for at
least 5 minutes after each use.
▶ Never remove limescale residues using
hard or metal objects.
Overview
→ Fig.
1
Base
1
Preventing material damage en
Kettle
2
Water level indicator
3
Handle
4
On/off button
5
Keep-warm function button
6
Temperature setting button
7
Temperature display
8
Lid-opening button
9
Lid
10
Limescale filter, removable
11
Cord store
12
11