Scrambler Ducati City Cross-E X Bedienungsanleitung Seite 9

Model Reference picture
Cross-E Sport
Method:
• Open the package without taking out the electrical scooter.
• Remove the package from the handlebar.
• Follow the instructions given for your electrical scooter model.
City Cross-E X Instructions
DU-MO-210003 / DU-MO-210008
• Raise the steering column, insert the handlebar taking care not to crush the cables.
• Secure the steering column by closing the knob (clockwise locking) of the folding mechanism.
• Insert and tighten the screws in the steering column using the key provided.
• Pick up the product from the package, open the kickstand and check for the product stability.
• Adjust the steering wheel closing mechanism** (if needed).
• Check the tyre pressure (see the side of the tyre for the recommended value).
• Press the power button to use the electrical scooter.
City Cross-E X Instructions
SC-MO-220004 / SC-MO-220005
• Raise the steering column, insert the handlebar taking care not to crush the cables.
• Secure the steering column by folding the locking mechanism lever inwards.
• Insert and tighten the screws in the steering column using the key provided.
• Pick up the product from the package, open the kickstand and check for the product stability.
• Perform adjustment of the steering column locking mechanism** (if necessary).
• Check the tyre pressure (see the side of the tyre for the recommended value.
• Press the power button to use the electrical scooter.
In the package
3x Allen key
4x Handlebar screws
1x Screw cover plate
1x Catch
1x Charger
1x Locking catch clip
2x Battery keys
08
Indications
Transport clip accessory:
Install the clip accessory,
necessary to lock the steering
column when it is in the closed
position.