Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Prior to using the item for the first time, charge to 100%.
•
Check tyre pressure (see side of tyre for recommended value). If the item does not reach at least 60% of the declared kms, or
the maximum speed within the first 3 months of use, it is likely that the wheels have deflated once more. In this case, restore
pressure as indicated.
•
Check and adjust the brakes.
•
Turn on the display.
•
Place the item on a flat surface.
•
Hold the handlebar firmly using both hands. Step onto the footrest with one foot and use the other to give yourself a gentle
push and accelerate.
CAUTION
Zero Start function: The accelerator is activated once the speed of travel exceeds 3 km/h.
For safety reasons, the item is initially set up to avoid standing starts.
•
When riding the item, tilt body in the riding direction during a turn and slowly turn the handlebars.
•
To stop the item, release the throttle and pull the brake lever.
•
To get off, first stop the vehicle. Getting off the moving electrical scooter may cause damage.
•
Prior to each use, check brakes and any wear, check tyre pressure (see side of tyre for recommended value), wheel wear,
throttle and charge status of battery.
Adjusting the position of the brake levers
Model
Figure
City Cross-E X
City Cross-E
UP Advanced
Safety
Cross-E Sport
6.
Quick guide
Instructions
Refer to point A (see figure) to adjust the position
of the brake lever, if needed
21
Werbung
