Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Steering column stability
Model
Reference picture
City Cross-E X
DU-MO-210003
DU-MO-210008
City Cross-E X
SC-MO-220004
SC-MO-220005
City Cross-E UP
Advanced
Safety
SC-MO-220007
SC-MO-220008
Cross-E Sport
CAUTION
Assemble the item correctly. If, during assembly, any factory defects are detected, certain steps are unclear or issues with
assembly or adjustments occur, do not ride the vehicle and contact your dealer or visit www.ducatiurbanemobility.com for
technical support.
Do not use accessories and/or additional parts that are not approved by the manufacturer.
Keep children away from plastic items (including packaging materials) and small parts that may result in suffocation.
It is forbidden to modify or transform the item or any its parts in any way, as this may impair efficiency, reduce structural integrity
and cause damage. Remove any sharp edges caused by misuse, breakage or damage to the item. If any factory defects,
unusual noises or faults are detected, do not ride the vehicle and contact your dealer or visit www.ducatiurbanemobility.com for
technical support.
**Adjusting the steering column closing mechanism
On the outer part of the mechanism, there is a knob. If the
steering column feels unstable after folding, check if the
knob has been tightened correctly.
A hexagonal pin is located inside the folding mechanism
lever. If the steering column is unstable after closing, it is
possible to adjust the pin of the mechanism by screwing
it or unscrewing it slightly until the desired stability is
obtained
There is a hexagon socket screw on the outside of
the folding mechanism. To increase the stability of the
steering column, turn the screw clockwise to increase the
stability. Adjust gradually, one-quarter turn at a time, and
check for stability after each adjustment.
10
Werbung
