Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instructions:
- Open the kickstand
- Switch off the item
CAUTION
Prior to using the item for the first time, charge to 100%. Ensure the item, charger, and charging port are dry.
Model
Reference picture
City Cross-E X
City Cross-E
UP Advanced
Safety
Cross-E Sport
To recharge the item, use the battery charger supplied ONLY
CAUTION
4.
Battery charging
Instructions
1. Remove the rubber cover from the charging
2. Connect the charger first to the mains socket
3. Unplug the charger from the charging port and
Activating and recharging the battery:
Raise the footrest to access the battery
compartment and activate the electrical circuit
using the button (see photo).
•
•
•
The red light on the charger will turn green when
charging is complete.
15
socket.
and then to the charging port of the electric
scooter.
When the item is fully charged, the light on the
charger changes from red (charging) to green
(charging complete).
then from the wall outlet. Re-insert the rubber
cover in the charging socket of the electrical
scooter.
Use only the supplied charger.
Connect the charger first to the wall socket and
only then to the charging socket.
Do not turn on the scooter while it is charging.
CAUTION
Werbung
