NEXDIAG NexPTG PROFESSIONAL Bedienungsanweisung Seite 34

3.4 OPERATION OF THE NexPTG APPLICATION
The application has been designed and written specifically for the NexPTG gauge and is an inseparable part of it
that allows the proper functioning of the device. The measurements are displayed in the main application view
and the MEASUREMENT tab.
SETTINGS measurement mode
The full NexPTG application manual is available on the manufacturer's website at
main application menu in the HELP tab. All copyrights and licenses relating to the NexPTG application are the
property of the manufacturer. It is prohibited to use the application in any other way than the author has
assumed.
4. MAINTENANCE
It is recommended to periodically clean the device with a cloth. Remember to keep the probe clean.
Its soiling can cause differences in measurements.
4.1 BATTERY REPLACEMENT
To replace the battery, unscrew the screw that secures the battery cover to the housing,
raise it as shown in the picture below. Then replace the batteries with new ones and screw
on the cover.
The gauge is powered with 1.5 V LR6 (AA) alkaline batteries – 2 pcs. The low battery indicator displayed on the
screen of the mobile device (external) indicates the need to replace the batteries with new ones. Their
discharge status is displayed as a percentage in the lower left corner of the main menu of the NexPTG
application.
IMPORTANT!
unit of measure
Pay attention to the polarity of the battery.
Incorrect operation of the gauge may be caused by battery depletion.
Alkaline batteries should be used.
NexPTG
other functions
www.nexdiag.com and in the
34