NEXDIAG NexPTG PROFESSIONAL Bedienungsanweisung Seite 31

2.4 CONSTRUCTION OF THE DEVICE
The gauge consists of two panels: the front panel (with diodes indicating power supply and connection, and a
multifunction key – switch on, switch off, save measurement) and the rear panel with the battery cover. The
electronics assembly is terminated with a probe with a measuring sensor.
3. OPERATION OF THE NexPTG GAUGE
Turn the device on or off by pressing the
the front panel lights up. Pressing this button once briefly saves the measurement in the application.
The NexPTG application can be downloaded from: Google Play and App Store.
3.1 FIRST START-UP
button and holding it down for 3 seconds, until the red diode on
In order to start the NexPTG gauge the button 3 should be
held down for three seconds until the power diode lights up on
the panel 2 Next, start the NexPTG application on the mobile
device (external). Correct communication will be signaled by the
lighting up of the blue diode 1 .
WARNING: The first start of the gauge requires access to the
Internet.
If there is no communication, the device (telephone, tablet,
smartphone) should be restarted and the NexPTG mobile
application should be restarted.
NexPTG
31