SolaX Power Box G2 Installationsanleitung Seite 2

Safety
General Notice
1. Contents may be periodically updated or revised. SolaX reserves the right to make
improvements or changes in the product(s) and the program(s) described in this manual
without the prior notice.
2. The installation and maintenance can only be performed by qualified personnel who:
• Are licensed and/or satisfy state and local jurisdiction regulations;
• Have good knowledge of this manual and other related documents.
3. Before installing the device, carefully read, fully understand and strictly follow the
detailed instruction of the user manual and other related regulations. SolaX shall not
be liable for any consequences caused by the violation of the storage, transportation,
installation, and operation regulations specified in this document and the user manual.
4. Use insulated tools when installing the device. Individual protective tools must be worn
during installation, electrical connection and maintenance.
5. Please visit the website www.solaxpower.com of SolaX for more information.
Descriptions of Labels
CE mark of conformity
UKCA mark of conformity
Do not dispose of the device together with household waste.
• Install and operate the device in accordance with provided instructions.
• The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter.
• End-users and installers must be provided with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance.
• Before installation, ensure all power of the adapter box has been cut off.
• Do not dismantle or scrap by force.
• Strictly follow the installation guide to connect cables and the enclosure must be
well locked before the adapter box is electrified.
Unauthorized opening and cable connection will void the warranty and cause lethal
danger or serious injury due to electric shock.
• Refer to the corresponding installation guide for related safety requirements when it
is connected to other devices.
• Anti-static measures should be taken to decrease the damage of static electricity to
electronic components.
• Keep away from flammable, explosive materials.
RF EXPOSURE WARNING!
CAUTION!
RCM mark of conformity
FCC mark of conformity
1