Werbung
Verfügbare Sprachen
Verfügbare Sprachen
X-OVER MODE
10
The X-OVER MODE switch selects the desired operating mode:
HP:
High Pass mode adjustable by FREQ. - frequency is limited downwards
FULL:
Full Range mode, the entire frequency range is amplified).
LP:
Low Pass mode adjustable by FREQ. - frequency is limited upwards
FREQ.
11
This controller determines the crossover frequency of the high or low pass filter. The crossover fre-
quency is continuously adjustable from 50 Hz to 500 Hz. See section 10.
BLC REMOTE
12
The BLC REMOTE port is for connecting the cable of the included bass level remote controller. With
this, the bass level can be e.g. be adjusted from the driver's seat. Only use the supplied bass remote
controller and the associated cable. The bass level remote controller only works in LP mode.
13
POWER/PROTECT
If the LED lights up in green, the amplifier is ready for operation. If the LED lights up in red, there is a
malfunction. Refer in this case to chapter TROUBLE SHOOTING on page 28.
ENGLISH
25
Werbung
