Zelmer ZIS8402 PRO-Compact Benutzerhandbuch Seite 12

PL EN
Do not allow the power cable to come into contact with the soleplate when it is hot.
B&B Trends S.L. disclaims all liability for damages that may occur to people, animals or objects, for the
non-observance of these warnings.
Before the first us
Before using the Steam Station, please ensure you read the user manual and understand all parts and
features of the Steam Station. Be sure to remove any packaging material and labels before using for the
� rst time.
In the first use they can break o f odors or fumes that sent quickly. Do not spray for the first time on
clothes and there may be traces of dirt on the soleplate.
USING YOUR APPLIANCE
1. Filling the water tank
Fill the water tank. Remove the water tank from the station and � ll it through the water inlet cover. Do
NOT fill over the MAX level indicato .
Make sure when placing it back to the station that it fits correctl .
Water to be used
The device is designed for use with tap water.
Important: Do not use additives!
If the water in your area is hard or semi-hard use mix tap water with distilled or demineralized water
purchased in stores, in the ratio 2:1 and 1:1 respectively (distilled water: tap water). Check with your
water supplier to determine the type of water in your area. Never use 100% distilled or demineralized,
rain water, softened water, scented water, water from other appliances such as refrigerators, air
conditioners, dryers or other types of home water preparation water.
2. Heating
1. Unwind the supply hose (4) and the mains cable (5). Plug mains cable into an earthed socket.
2. Press the button (2) to switch the appliance on. The indicator light (2) will flash indicating that th
appliance is heating up.
3. When the iron is ready to use, the indicator light (2) will remain permanently lit. Two beeps will be
heard.
3. Ironing
1.Press the steam release button (12) for ironing with steam.
Important:
During first use: Press the steam release button for 40 seconds until steam comes out
During the first seconds of use the amount of steam will be lower and it will increase progressivel .
Drops of water may leak out while there is still air in the circuit.
Warning: Ironing with an excessive amount of steam may produce condensation of the hot water
and dripping from the ironing board or through any other permeable surface.
"Steam Turbo Shot" function
This appliance has a special function for tackling difficult creases
1. Press the steam release button (12) two times in quick succession (double-click). Powerful shots
of steam will be released.
Vertical steam
Can be used to remove creases from hanging clothes, curtains, etc.
1. Hold the iron in an upright position 15 cm away from the garment to be steamed.
2. Press the steam release button (12) repeatedly with pauses of at least 5 seconds.
12