Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Separate the combed hair into strands no
more than 5 cm wide. If necessary, separate
the strands using hair clips.
5. Switch the appliance on pushing the button
EIN/AUS [ON/OFF]. The indicator light
lights up red.
6. Heat
the
appliance
90 seconds in order to achieve the best
styling result.
7. Open the appliance and place a small
section of hair between the straightening
plates close to the root.
8. Shut the appliance.
9. Now work your way down slowly and evenly
to the ends of your hair. Maintain the
appliance firmly closed during this process.
Never work the same part for more than two
seconds to avoid damaging your hair. For
an even and straight look, work your way
cleanIng anD care
1. Unplug the appliance from the wall socket.
2. Let the appliance cool off completely placing it
on a heat resistant surface.
3. Never immerse the appliance or the lead
cable in water or other liquids to clean them.
4. Clean the appliance with a damp cloth.
5. Do
not
use
abrasive agents, steel wool, metal objects,
Storage
1. Unplug the appliance from the wall socket.
2. Let the appliance cool off completely placing it
on a heat resistant surface.
up
for
approx.
any
scrubbing
sponges,
straight down keeping the appliance close
to your head. Working your way through
slightly lifting the appliance will give your
hair more volume.
10. Please remember that the straightener
plates are very hot after use.
11. Always switch the appliance off using
the EIN/AUS [ON/OFF] switch before
disconnecting the plug from the wall socket.
12. TIP: You can also curl your hair with the
straightener! Place the strand between the
plates as usual and straighten your hair.
Shortly before the ends of your hair, turn
the appliance to the inside or the outside
(according to the desired look) to give your
hair a gentle movement to inside or the
outside.
disinfectants or hot cleaning agents, since
they can damage the appliance.
6. Protect the appliance from dust and clean
the air inlets with a soft brush, if necessary.
7. Clean the straightener plates with a damp
cloth, if necessary. Let the attachments
dry completely before using them again or
storing them.
3. To avoid damage to the lead cable, never
wrap it around the appliance.
11
Werbung
Inhaltsverzeichnis
