Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
27. Check the plug and lead cable regularly for
wear and tear. If the lead cable or other parts
show damage, please send the appliance to
our after-sales service for inspection and
repair (for address, see warranty terms).
Unauthorised repairs can constitute serious
risks for the user and void the warranty.
28. If the lead cable is damaged, it must be
replaced by the manufacturer or its after-
sales service or a similarly qualified person
in order to avoid any hazard.
the manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.
your new haIr StraIghtener
1
Ceramic straightener plates
2
EIN/AUS [ON/OFF] switch
3
EIN/AUS [ON/OFF] indicator
light
beFore FIrSt uSe
1. Remove all packaging materials and any
transport safety devices. Keep packaging
material out of reach of children. Danger of
suffocation!
2. After washing your hair, dry it thoroughly
with a towel.
oPeratIon
The plates of the hair straightener are ceramic-coated to protect your hair and leave it shiny after
straightening. Nevertheless you should not straighten your hair too often. This applies especially to
colour treated or otherwise chemically treated hair (e.g. perms).
Before straightening your hair please do not use any chemical hair-styling products like hair spray to
avoid burning your hair.
attention: the appliance becomes very hot during operation. avoid direct skin contact. danger of burns!
1. Prepare your hair as described in the chapter
„Before first use".
2. Attention: your hair should be completely
dry before straightening. Straightening your
hair when it is still damp will damage your
10
from the wall socket after use, since nearby
water presents a danger even when the hair
straightener is switched off.
1
2
3
3. Best results are achieved with dry hair. Dry
your hair well using a hair dryer, if necessary.
4. Brush your hair until it falls loosely.
hair. Therefore you should dry your hair well
using a hair dryer, if necessary.
3. Connect the plug to a wall socket (230 -
240 V~, 50 Hz).
attention: the appliance becomes very
hot during operation and maintains
the heat during some time after dis-
connection.
for safety reasons never use the
appliance close to or in a bathtub or
washbasin or any other container filled
with water.
If the hair straightener
is used in a bathroom, unplug it
Werbung
Inhaltsverzeichnis
