Sundirect Smart2.0 Bedienungsanleitung Seite 6

3.5.2 Smart mode program setting
a.) Press the PRG button until the screen shows PRG.
b.) Long press "PRG" to start the program setting.
c). You will see the number (01) will start to flash. The number 01 or 02 refers
to two different program setting as follows,
01: Simple program setting- 5+2(weekday and weekend)
02: Precise program setting- 7days each day individual setting.
Choose the number 01 or 02 by pressing "-" or "+" button, confirm and press
"PRG" again to go to the detail setting of the program.
d). Press "-" or "+" button to set the time of the 1st period of Monday Program
e). Press the "PRG" button again to confirm the time setting and the screen
will shift to the temperature setting of the 1st period of the Program.
f). Continue by pressing the "PRG" button to shift to the time setting of the
2nd period. Repeat above procedure to finish settings of remaining 3 periods
of Program. Then move on to setting of next day until Sunday to finish.
To leave settings in between, please press the "Power" button.
3.5.3 Default program setting on Smart mode
The following table shows our default program settings of Smart mode. To
modify program on Smart mode, we suggest you calibrate clock setting, then
make a similar table as our example and set according to table. Of course,
you can also set up each day differently according to your schedule.
Monday/Tuesday/Wednesday/Thursday/Friday
Period
Time
Temperature
PRG1 PRG2
6:30 8:00
21℃ 18℃
PRG3 PRG4
18:00 22:30
21℃ 16℃
6
Saturday/Sunday
PRG1 PRG2
8:00 10:00
21℃ 18℃
PRG3 PRG4
18:00 23:00
21℃ 16℃