Set Up The Camera; Osd Menu; Ip Address Setup - AVer MD120UI Bedienungsanleitung

Set up the Camera

Configure camera settings through the OSD menu or the web interface.

OSD Menu

To access the OSD menu, connect the camera to a monitor or TV using an HDMI cable, and then use
the supplied remote control to operate the OSD menu.
Press and hold Menu
select and press Enter

IP Address Setup

Static IP
1. Press and hold Menu
2. Go to Network > Static IP.
[Note] Turn the DHCP off before setting up static IP (Network > DHCP > OFF).
3. Select the IP Address, Gateway, Netmask, and DNS to configure. Press Enter
number buttons to enter the value.
for 3 seconds to open the OSD menu. Use directional buttons ▲▼  to
to confirm settings.
for 3 seconds on the remote control to open the OSD menu.
13
and use the