Tilt Protection; Overheating Protection - FUAVE Helsinki 2000 Bedienungsanleitung

5. When the room temperature feels comfortable, slowly turn the
thermostat switch
The heating temperature is now set to the current room
temperature.
The device will automatically heat the room to the set
temperature.

3.5. Tilt protection

This device is secured with tilt protection that automatically switches
off the device when the device falls over. When the tilt protection is
engaged, the device has to be reset:
1. Turn the power switch
2. Let the device cool down.
3. Pull the power cable
4. Remove the cause that made the device fall over.
5. Wait at least 5 minutes before resuming use of the device.

3.6. Overheating protection

This device is secured with overheating protection that automatically
switches off the device in case of overheating. When the
overheating protection is engaged, the device has to be reset:
1. Turn the power switch
2. Let the device cool down.
3. Pull the power cable
4. Remove possible blockades from the ventilation opening
5. Wait at least 20 minutes before resuming use of the device.
USER MANUAL
3 backwards until the device is turned off.
to 0.
4
2
from the wall socket.
to 0.
4
2 from the wall socket.
1 .
31