System Requirements - Anslut 024727 Bedienungsanleitung

EN
Size
DESCRIPTION
This is a SMART product that can be connected to existing WiFi and
controlled via the app Smart Life, or with a voice assistant. Does not
require a separate hub/router. You can control all SMART products
in the app and use functions such as timer control, scheduling and
automatised events.
The LED strip is powered by the supplied power adapter that is plugged
into a wall outlet. The LED strip is five metres long. The remote control
runs on 1 x CR2025 battery. Cannot be shortened or modified.
PARTS
1. LED control unit
2. Infrared receiver
3. Connector
4. Mains adapter
5. LED strip with self-adhesive
tape
6. Connection cable
7. Screws, 32x

SYSTEM REQUIREMENTS

Check that the smartphone is connected to the 2.4 GHz WiFi network
and switch on the light. WiFi router. iPhone, iPad (IOS 11.0 or higher)
or Android (5.0 or higher). Compatible with Google Assistant, Amazon
Alexa etc.
32
L 5000 x W 12 x H 3 mm
8. Clips for LED strip, 15x
9. Clips for WiFi control unit, 2x
10. Battery CR2025
11. Remote control
12. 2x5 m self-adhesive tape
for WiFi control unit
(not shown in figure 1)
FIG. 1