9.
Open the ball valve at machine compressed air line (the handle of the open valve
should be parallel to the compressed air line).
10.
Open the safety ball valve 14 (Fig.2.1).
11.
Close metering valve SGV by rotating the handle clockwise.
12.
Connect compressed air hose to hose coupling of the machine. Compressed air hose
diameter should be at least 1.1/4". Lock hose coupling with a safety clip or wire.
13.
Connect abrasive blasting hose to hose coupling of the machine. Lock hose coupling
with a safety clip or wire.
14.
Fill the machine tank with abrasive.
15.
Put protective equipment on.
CONTRACOR® BlastRazor Z-100 RCS/ BlastRazor Z-200 RCS Art.10400102/10400202
7