Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Safety.
ATTENTION!
SAFETY MEASURES FOR ABRASIVE BLASTING.
1.
You must wear protective equipment: a helmet with positive
air feed, breathing air filter, protection suit, leather gloves, and
special footwear.
2.
Do not use worn or damaged equipment during operation.
3.
Point the nozzle only at the area to be cleaned.
4.
Use only dry well-sieved abrasive materials, appropriate for
abrasive blasting operations.
5.
All personnel without protection equipment should be outside the
zone of blasting operations.
6.
Before starting abrasive blasting operations you must:
— Ensure that hoses and fittings are not worn;
— Fix hose couplings with wire;
— Ensure that air is fed to the helmet;
— Ensure that pressurizing valve is in correct position;
— Ensure that the machine is in steady state position
CONTRACOR® BlastRazor Z-100 RCS/ BlastRazor Z-200 RCS Art.10400102/10400202
3
Werbung
Inhaltsverzeichnis
Fehlerbehebung
