Safety Precautions - PeakTech 4250 Bedienungsanleitung

1. Safety Precautions

This product complies with the requirements of the following
directives of the European Union for CE conformity: 2014/30/EU
(electromagnetic
2011/65/EU (RoHS). Overvoltage category II 300 V (P 4250);
overvoltage category II 1000 V (P 4300); pollution degree 2.
CAT I: For signal level, telecommunication, electronic with small
transient over voltage
CAT II: For local level, appliances, main wall outlets, portable
equipment
CAT III: Distribution level, fixed installation, with smaller transient
overvoltage than CAT IV.
CAT IV: Units and installations, which are supplied overhead lines,
which are stand in a risk of persuade of a lightning, i.e.
main-switches on current input, overvoltage-diverter,
current use counter.
To ensure safe operation of the equipments and eliminate the danger
of serious injury due to short-circuits (arcing), the following safety
precautions must be observed.
Damages resulting from failure to observe these safety precautions
are exempt from any legal claims whatever.
General:
* Read these operating instructions carefully and make them
available to subsequent users.
* It is essential to observe the warning notices on the device, do
not cover or remove them.
* Pay attention to the use of the device and only use it in the
suitable overvoltage category II.
* Familiarize yourself with the functions of the measuring device
and its accessories before you carry out the first measurement.
compatibility),
13
2014/35/EU (low voltage),