MAST M.3X Bedienungsanleitung Seite 22

MAINTENANCE
Care and maintenance
•
Inspect all screws, rivets and other parts regularly to ensure they are
secure and safe and replace any parts that are in poor
condition. It is very important to thoroughly clean and dry the
pushchair after use in winter, by the sea, in the woods or in the rain. Sea
salt can cause the metal parts to corrode. After use in these conditions,
wipe down with clean water and dry thoroughly.
•
When used on the beach, wash away any sand from the wheels and axles
every day to prevent the axles from becoming worn and the wheels from
rusting and becoming stuck. Wash the wheels and axles with clean water,
dry and re-lubricate.
•
Regularly check that the pushchair's locking device is working properly.
•
If you find any parts on the pushchair that are damaged, stop using the
pushchair and contact the seller immediately.
•
Do not expose the pushchair to strong sunlight for extended
periods of time. Even exposure to ultraviolet light during normal use may
cause the fabric to fade.
•
Be careful not to tear the fabric when loading or transporting the
pushchair in a vehicle.
•
Low viscosity oils or lubricants may be used on the pushchair's
mechanical components.
41
M.3x manual DE IT EN FR ES 26.11.2021.indd 42-43 M.3x manual DE IT EN FR ES 26.11.2021.indd 42-43
•
Petroleum jelly is a good lubricant for use on the front axle.
•
Sea air, saltwater and sand can cause corrosion. Clean and dry rivets,
screws and wheels regularly to prevent rust.
•
Wash the fabrics in lukewarm or cool water using a mild detergent.
•
DO NOT WASH THE FABRICS IN THE WASHING MACHINE
tearing and splitting the seams.
•
The parking device should be in place when placing and removing chil-
dren.
•
Any load attached to the handle, backrest and/or sides of the pushchair
will affect the stability of the pushchair.
•
For car seats used in conjunction with a chassis, this vehicle does not
replace a cot or a bed. Should your child need to sleep, it should be
placed in a suitable pram body, cot or bed.
•
The M4x stroller is compatible with the following products
M.3 / M.4 Bassinet, M.3x / M.4x Bassinet,
M.4 carseat adapter
MAINTENANCE
to avoid
42
01.12.2021 13:33:31 01.12.2021 13:33:31