Intended Use; Scope Of Delivery; Declaration; General Information - hymer 8273 Aufbau- Und Verwendungsanleitung

4.

Intended use

The product is intended for the following uses:
▪ as a mobile working platform for use at a variety of different places.
▪ as a working platform for work at a specifi ed maximum height.
▪ for temporary use indoors and outdoors.
Non-intended use means any use that is not described as an intended
use in this document or that goes beyond it. The operator alone bears
the risk for any resulting damage.
5.

Scope of delivery

▪ Before starting product assembly, check whether all components
are included in the delivery and in perfect condition.
▪ If any components are found to be missing, damaged or defective,
contact the manufacturer or dealer.
6.

Declaration

The following data is required for the designation of all mobile towers
made of prefabricated components:
Example: EN 1004 - 3 - 8,64 / 12,64 - D - H2
A B
A × B
Platform length × frame width
7.

General information

NOTE!
i
This product may only be used in accordance with the infor-
mation in these assembly and usage instructions. Changes
are not permitted.
NOTE!
i
This product may only be operated according to nationally
applicable legal regulations.
NOTE!
i
This product complies with the currently valid standards and
safety guidelines. Corresponding test certifi cates or sup-
porting documents can be requested via the listed contact
address.
2022-04 0095859 8273 TNR
h1 max.
h1 max.
Maximum permitted height of work-
ing platform outside of buildings
In particular, the following uses of the product is not permitted:
▪ as a means of transporting tools and materials.
▪ as a means of transporting persons.
▪ as an auxiliary means for demolition work (due to vibrations).
▪ as an item of sports equipment.
▪ Observe adhesive labels bearing the component number.
▪ For accessories and add-on parts, please refer to any other docu-
ments supplied.
Mobile tower according to EN 1004; load class 3; maximum permitted
height of the working platform outside of buildings 8.64 m; maximum
permitted height of the working platform inside of buildings 12.64 m;
access class D (A = stair; D = vertical ladder); headroom class H2
h2 max.
h2 max.
Maximum permitted height of work-
ing platform inside of buildings
▪ The operator is responsible for the safe operation of the product.
▪ The operator is responsible for ensuring that installers or users
receive appropriate instruction before erecting or using the product
for the fi rst time.
▪ The safe operation of the product must be checked regularly by
maintenance personnel authorised by the operator.
▪ Users may only use and operate the product if they have been
instructed accordingly.
▪ The product is not intended to be used by persons with reduced
physical, sensory or mental capabilities, or lack of experience and/
or knowledge, unless they are supervised by a person responsible
for their safety.
Max.
Permitted load per m²
19
EN 1004-2 – en