Philips AVENT SCF282/01 Bedienungsanleitung Seite 7

Preparing for use
Filling the basket
Before you put the items to be sterilised in the basket, clean them thoroughly in the
dishwasher or clean them by hand with hot water and some washing-up liquid. Make
sure you remove all milk residues.
Note: Make sure all items to be sterilised are completely disassembled and place
them in the basket with their openings pointing downwards, to prevent them
from filling with water.
Note: Do not stack the items too closely together. The steam has to be able to
circulate around the items to ensure effective sterilisation.
There are several ways to fill the basket:
Four Philips AVENT feeding bottles
1 Place the bottles upside down in the bottle cavities. (Fig. 7)
2 Place the teats in the teat cavities (Fig. 8).
3 Place the screw rings loosely on top of the teats (Fig. 9).
Note: Larger screw rings only fit if placed in slanted position over the teats.
4 Place the dome caps in the dome cap holders (Fig. 10).
Two large Philips AVENT feeding bottles (330ml/11oz)
1 Insert the rim of the bottles into the slots for large bottles (Fig. 11).
2 Place the teats in the teat cavities (Fig. 12).
3 Place the screw rings loosely on top of the teats (Fig. 13).
Note: Larger screw rings only fit if placed in slanted position over the teats.
4 Place the dome caps in the dome cap holders (Fig. 14).
Four Philips AVENT storage cups and lids
1 Place the storage cups upside down in the basket (Fig. 15).
2 Place the lids vertically around the bottles. (Fig. 16)
Two Philips AVENT breast pumps and two Philips AVENT feeding bottles
Do not place the electrical parts in the steriliser.
1 Fully disassemble the breast pump.
2 Insert the rim of the pump body in the breast pump slots in the bottom of the
basket (Fig. 17).
3 Place the bottles upside down in the bottle cavities (Fig. 18).
4 Place the remaining non-electrical parts of the breast pump in any
unobstructed space in the basket (Fig. 19).
Note: Make sure steam can circulate around these parts.
ENGLISH
7