Cleaning And Maintenance; Water Inlet Filters - Kuppersberg WDM 560 Technischer Pass

TECHNICAL PASSPORT
Washer Dryer
7. CLEANING AND
MAINTENANCE
7.1. Warning
Turn your mains power supply off
and remove the plug from the socket
before carrying out maintenance and
cleaning of your machine.
Turn off the water supply before
starting maintenance and cleaning of
your machine.
CAUTION: Do not use solvents,
abrasive cleaners, glass cleaners or all-
purpose cleaning agents to clean your
Washing Machine. They may damage the
plastic surfaces and other components
with the chemicals they contain.

7.2. Water Inlet Filters

 Water inlet filters prevent dirt
and foreign materials from entering
your machine. We recommend that
these filters are cleaned when your
machine is unable to receive sufficient
water, although your water supply is
on and the tap is open. We recommend
that you clean your water inlet filters
every 2 months.
 Unscrew the water inlet hose(s)
from the Washing Machine.
90
 To remove the water inlet filter
from the water inlet valve, use a pair of
long- nosed pliers to gently pull on the
plastic bar in the filter.
 A second water inlet filter is
located in the tap end of the water inlet
hose. To remove the second water inlet
filter, use a pair of long-nosed pliers
to gently pull on the plastic bar in the
filter.
 Clean the filter thoroughly with
a soft brush and wash with soapy water
and rinse thoroughly. Re-insert the filter
by gently pushing it back into place.
CAUTION: The filters at the
water inlet valve may become clogged
due to water quality or lack of required
maintenance and may break down.
This may cause a water leak. Any
such breakdowns are out of the scope
of the warranty.
ENGLISH