Start/Pause Button - Kuppersberg WDM 560 Technischer Pass

TECHNICAL PASSPORT
Washer Dryer

5.7. Start/Pause button

By pressing on the Start/Pause
button, you may start the programme
you have selected or suspend a running
programme. If you switch your machine
to the standby mode, the Start/Pause
led on the electronic display will blink.
5.8. Child Lock
The Child Lock function allows
you to lock the buttons so that the
wash cycle you have chosen cannot be
changed unintentionally.
To activate child lock, press and hold
button 4 and 5 simultaneously for at
least 3 seconds. ''CL'' will flash on the
electronic display for 2 seconds when
the child lock is activated.
If any button is pressed or selected
programme is
programme dial while the child lock is
active, the "CL" symbol will flash on the
electronic display for 2 seconds.
If the child lock function is active
and a programme is running, when the
programme dial
the CANCEL position and another
programme is selected the previously
selected programme continues from
where it was left.
To deactivate the child lock, press
and hold button 4 and 5 simultaneously
for at least 3 seconds until the "CL"
symbol on the electronic display
disappears.
84
changed by the
is turned to
5.9. Cancelling the Programme
To cancel a running programme at
any time:
1. Turn the programme dial to the
"STOP" position.
2. Your machine will stop the
washing operation and the programme
will be cancelled.
3. Turn the programme dial to any
other programme to drain the machine.
4. Your machine will perform the
necessary draining operation and cancel
the programme.
5. You can now select and run
a new programme.
5.10. Programme End
Your machine will stop by itself
as soon as the programme you have
selected finishes.
 "END" will flash on the electronic
display.
 You can open the machine's door
and remove the laundry.
 Leave the door of your machine
open to allow the inner part of your
machine to dry.
 Switch the programme dial to
STOP position.
 Unplug your machine.
 Turn the water tap off.
ENGLISH