Cleaning And Maintenance; Technical Data - CONSTRUCTOR CHAGD2003-BM Übersetzung Der Originalanleitung

CLEANING AND MAINTENANCE

Attention! Before performing any
work on the equipment, pull the
_ Regularly clean the housing with a soft cloth.
_ Keep the ventilation slots of the machine
clear/clean to prevent overheating of the engine.
_ Regularly clean the machine housing with a soft
cloth, preferably after each use.
_ Keep the ventilation slots free from dust and dirt.
_ If the dirt does not come off use a soft cloth
moistened with soapy water.
Never use solvents such as
petrol, alcohol, ammonia water,
etc. These solvents may damage
the plastic parts.
Lubrication
Your power tool requires no additional lubrication.

TECHNICAL DATA

Mains voltage
Mains frequency
Power input
No. of temperature settings 3
Max. air temperature
Max. air flow
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
Weighted root mean square acceleration according
to relevant standard. : < 1,5 m/s ²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
power plug.
230-240V
50 Hz
2000 W
50°-300-600°C
500-300-500 l/min
ATTENTION !
must be worn.
SERVICE DEPARTMENT
_ Damaged switches must be replaced by our after-
sales service department.
_ If replacing the power cord is necessary, it
should be done by the manufacturer or his agent
to avoid a hazard.
AFTER-SALES SERVICE AND
APPLICATION SERVICE
Our after-sales service responds to your questions
concerning maintenance and repair of your product
as well as spare parts. Exploded views and
information on spare parts can also be found
under:www.eco-repa.com
application service team will gladly answer
questions concerning our products and their
accessories : sav@eco-repa.com
STORAGE
_ Thoroughly clean the whole machine and its
accessories.
_ Store it out of the reach of children, in a stable and
secure position, in a cool and dry place, avoid too
high and too low temperatures.
_ Protect it from exposure to direct sunlight. Keep it
in the dark, if possible.
_ Don't keep it in plastic bags to avoid humidity
build-up.
GUARANTEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
DOUBLE YOUR WARRANTY
Register your warranty on
www.elemtechnic.com
BY REGISTERING:
* You double the duration of your warranty
* You benefit from regular information on our new
products and promotions
ENVIRONMENT
Should your machine need
extended use, do not put it in
the domestic waste but
environmentally safe way.
The manual in PDF format is available on our
website: ww.eco-repa.com
Made in China
CONSTRUCTOR
replacement after
dispose of it in an
2023
16