Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
-
Only connect the appliance to an earthed wall socket.
-
Always unplug the appliance after use.
-
The toaster is intended for household use only and may only be used indoors. It is not intended
for commercial or industrial use.
-
If a slice of bread gets stuck inside the toaster, unplug the appliance and let it cool down before
you try to remove the bread. Do not use a knife or a sharp tool, as these may cause damage to
the heating elements.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
Before first use
1
Remove any stickers and wipe the body of the toaster with a damp cloth.
Before you use the appliance for the first time, we advise you to let the appliance complete a
few toasting cycles without slices of bread on the highest browning setting in a properly
ventilated room. This burns off any dust that may have accumulated on the heating elements
and prevents unpleasant smells during toasting.
using the appliance
1
To adjust the length of the cord, wind part of it round the brackets in the base of the
appliance.
Put the appliance on a stable and flat surface, away from curtains and other combustible
materials.
Put the plug in the wall socket.
toasting bread
Never let the toaster operate unattended.
1
Put one or two slices of bread in the toaster (Fig. ).
For the best toasting results, always put the slices in the centre of the slots.
Move the browning setting slide to the desired browning setting. (Fig. )
Select a low setting (1-3) for lightly toasted bread and a high setting (5-7) for a darkly toasted bread.
Push the toasting lever down to switch on the appliance. (Fig. )
The toasting lever only stays down when the appliance is connected to the mains.
The stop button lights up.
,
The metal parts of the toaster become hot during toasting. Do not touch them.
Note: You can stop the toasting process and pop up the bread up at any time by pressing the stop
button (Fig. 5).
To adjust the browning setting during toasting, move the browning setting slide to another
setting.
5
When the toast is ready, it pops up and the toaster switches off automatically.
6
Remove the toasted bread. To remove smaller items, you can move the toasting lever
upwards a little further.
4222.200.0268.1.indd 7
All manuals and user guides at all-guides.com
EnglisH
11-11-2008 09:11:05
Werbung
Inhaltsverzeichnis
