LENCO Xemio-669 Bedienungsanleitung Seite 9

Note: Do not remove the player from the computer if the transfer of files between the devices is
not finished. This can result in data loss and damage the medium.
4. Commissioning / Charging the battery / Headphones
The player has an installed internal rechargeable battery. Make sure before activating the device
for the first time that the battery is fully charged. This process usually takes around 2 hours.
Charging the battery:
The battery is charged via the USB connection with your PC. To charge the battery, connect the
device with the PC using the USB cable. The charging process starts automatically.
Note: For optimum performance, the battery must be used regularly. If this is not the case, recharge
the battery at least once a month.
Charging status:
Press any button to view the current charging status. A battery symbol is now shown on the top
right corner of the screen. If the battery is fully charged, a solid battery icon is shown. If the
battery is still charging, a charging animation is displayed.
Usage during the charging process:
You can use the player during the charging process. Simply press once more on the M button and
the device changes from the charging status display into the main menu.
Note: If you change into the charging status display or use the device connected to the computer,
data transfer with the computer is no longer possible. To be able to transfer files again, you must
reconnect the player to the computer.
Switching on:
You will find further information on this in the next section "Operation".
Using the headphones:
This player can play music through the 3.5mm jack connector. Before connecting make sure that
the player is set to a low volume level. Now connect the supplied headphones with the device and
slowly adjust the volume to your desired level. Use only the supplied headphones.
7