Adding An Action - Monacor EPS110/RS485 Bedienungsanleitung

Fig. 3 Start screen

5.1.2 Adding an action

Use the button "Add Action" to add a new row for an action in
response to an event . It is also possible to add multiple action rows
for an event .
The type of action (Action Type) can now be further specified under
"Action Configuration" on the right:
Action Type Description
COM Transmission of a defined string via the RS-485 interface
Note: The action type COM is only available when the option "Common
Com-Port" is selected in the device settings (Device ⇒ Settings) under
"Com Multifunction configuration"(
Player Replay control: e . g . play audio file, stop replay, select
audio file, adjust volume, etc .
A description of all commands can be found below .
Note: The options not described here are irrelevant for EPS110/ RS485 .
For each action, a start with a delay of up to 6 seconds can be defined
via "Delay time for Action" .
In the section "Action Configuration", the input field "Description"
can be used for a comment explaining this action .
The "Player" control offers the following commands:
Command Description
Stop Stop replay of the track (audio file)
Start Select track and start playing
Play/ Pause Play/ Pause function: When the action is triggered for
the first time, the replay will pause and the position
will be saved . When the action is triggered again,
replay will continue from the position saved .
Play/ Resume Resume after pause . The current position is queried
and continued from there; if no position is available,
the track will start from the beginning . .
Pause Pause replay – position will be saved
☞ chapter 5.1.5).
Command Description
Next Skip to next track
Prev Skip to previous track
File Preselection of a track . The track path will be saved
to the memory, but the track will not be played . In
response to a file command, a simple play command
will start the track from the memory .
Fast Forward Fast forward of current track
Rewind Fast rewind of current track
Next Folder Skip to next folder
Prev Folder Skip to previous folder
Volume Up Volume up (start volume adjustment)
Volume Down Volume down (start volume adjustment)
Volume Stop Stop volume adjustment
Volume Up Left Volume up, left channel (start volume adjustment)
Volume Down Left Volume down, left channel (start volume adjust-
ment)
Volume Stop Left Stop volume adjustment, left channel
Volume Up Right Volume up, right channel (start volume adjustment)
Volume Down Right Volume down, right channel (start volume adjust-
ment)
Volume Stop Right Stop volume adjustment, right channel
Volume Set Direct setting of volume
Notes: With the function Play/ Pause, a button that will alternately switch be-
tween Play and Pause can be used for control . With the functions Play/ Resume
and Pause, however, two different buttons can be assigned; one button for
Play and another button for Pause .
For each command, a deviation from the basic device setting (Device ⇒ Set-
☞
tings, chapter 5 .1 .5) can be achieved with the option "Loop mode" for the
repeat mode . The default setting "noChange" means that this command will
not change the current repeat mode .
17