Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5
4
6
Fig. 1 Connections
2 Important Notes
The product corresponds to all relevant directives of the EU and is
therefore marked with
gekennzeichnet .
The product corresponds to the relevant UK legislation and is therefore
marked with UKCA .
• The product is suitable for indoor use only . Protect it against dripping
water, splash water and high air humidity . The admissible ambient
temperature range is −35 to +55 °C .
• For cleaning only use a dry, soft cloth; never use water or chemicals .
• No guarantee claims for the product and no liability for any resulting
personal damage or material damage will be accepted if the product
is used for other purposes than originally intended or if it is not
expertly repaired . Likewise, no liability will be accepted for any data
loss or consequential damage caused by incorrect use or a defect .
If the product is to be put out of operation definitively,
dispose of the product in accordance with local regulations .
1
2
3
3 Applications
The audio player EPS110/ RS485 is designed for permanently installed
PA systems and is suitable for a wide range of applications (repro-
duction of music and control of announcements) . It offers extensive
functions for reproducing audio files in WAV and MP3 format from a
memory card . The audio player is triggered by events, such as control
signals at the seven switching inputs or user-defined control commands
via the RS-485 interface . The control program also allows action delay
of up to 60 seconds . In response to events, strings that can be defined
as desired can be sent via the RS-485 interface in addition to the
reproduction functions .
The device is programmed via an XML file located on the memory
card . This file can be easily created using the PC software "Monacor
Infotainment Configurator" .
4 Installation
4.1 Mounting
The housing is designed as a top hat DIN rail module for quick instal-
lation in an electrical enclosure or distribution board .
Fig. 2 Dimensions
Use the clips on the back of the housing to fix the module on a top
hat DIN rail
4.2 Electrical Connection
The connection is made via three plug-in terminal blocks (1 – 3),
each with 8 push-in spring terminals . These terminals are suitable
for connecting finely stranded conductors or solid conductors with
a cross-section of 0 .2 to 1 .5 mm² . The terminal blocks are keyed to
avoid confusion .
4.2.1 Audio outputs
Use terminal block X3 (3) to connect the audio outputs of EPS110/ RS485
to the audio inputs of the device that follows (e .g . an amplifier EPS32) .
Contacts 19 – 21 provide the signal of the left stereo channel; con-
tacts 22 – 24 provide the signal of the right stereo channel . The audio
outputs are balanced .
For connection to unbalanced signal inputs, only use the terminals +
and ⏚. The audio outputs can also be used to directly connect head-
phones (impedance ≥16 Ω) .
CAUTION
Always ensure that the volume is not too high,
especially when using headphones . Permanent high
volumes may damage your hearing!
4.2.2 Switching inputs
Terminal block X2 (2) provides 7 switching inputs for controlling
EPS110/ RS485 . These inputs can be used, for example, to connect
pushbuttons that will connect the corresponding input to the reference
voltage at contact 16 .
15
Werbung
Inhaltsverzeichnis
