Cleaning; Disposal; Trouble Shooting - Zipper Mowers ZI-MOS145G Originalbetriebsanleitung

16.2

Cleaning

The usage of certain solutions containing ingredients damaging metal sur-
faces as well as the use of scrubbing agents will damage the machine sur-
face!
Clean the machine surface with a wet cloth soaked in a mild solution
Clean the machine from mud and grass after every operation:
Protect non coated metal parts against corrosion (e.g. with oil or WD40)!
16.3

Disposal

Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local
dealer for a replacement unit, the latter is obliged to exchange your old.
The product is manufactured according to the REACH Regulation (EC-1907-2006).
17

TROUBLE SHOOTING

Trouble
 Motor does not start
 Bad cuts
ZIPPER MASCHINEN GmbH  www.zipper-maschinen.at
Motorsense / brush cutter ZI-MOS145G
All manuals and user guides at all-guides.com
Possible cause
 No fuel
 Fuel not in fuel pipe
 Fuel filter clogged
 Spark plug dirty or dam-
aged
 Faulty fuel line
 Foreign material wrapped,
grass around the sheet
 Long grass
 Blunt saw blade
N O T I C E








TROUBLE SHOOTING
Solution
refuel
Squeeze fuel nipple 3x
Clean the filter in the fuel
tank. Use for refueling a fil-
ter to avoid in future clog-
ging.
Clean spark plug from de-
bris, check contact dis-
tance, should be 0.6 -
0.7mm (credit card thick-
ness).
Check fuel line for damage
and kinks
Shut machine off, wait until
cutter stands still, remove
the winded up material
Remove material
Sharpen or replace saw
blade
Seite 37
Seite 37