Maintenance; Maintenance Plan; Cleaning The Air Filter And Muffler; Check The Spark Plug - Zipper Mowers ZI-MOS145G Originalbetriebsanleitung

16

MAINTENANCE

Shut the machine off before performing any checks, cleaning or maintenance!
The machine does not require intense maintenance.
If you sense machine malfunctions, bring the machine to a professional service center.
Wear firm gloves when installing or removing the cutting blade.
Damaged cutting tools may be not straightened or welded in no case!
Repairs may only be carried out by trained persons only!
16.1

Maintenance plan

Loose or lost screws
Damage of machine parts
Damage the cutting attachment
Fuel tank leak
Clean the machine
Clean the spark plug
Clean the air filter

16.1.1 Cleaning the air filter and muffler

The muffler needs to be cleaned approx. Every 150 working hours.
The air filter has to be cleaned approx. every 100 working hours. This
may vary depending on the air quality of your working area.
Polluted and clogged air filters reduce the engine output by far and may
lead to engine damage.
To clean the air filter just remove the black air filter cover and take the
filter out. Wash it in a mild water based solvent, squeeze it out, let it
dry, put it back again.

16.1.2 Check the spark plug

 Clean of debris with metal brush.
 Check spark plugs match of 0.6-0.7mm

16.1.3 Carburettor

Carburetor adjustments should be carried out only by trained specialist personnel!
ZIPPER MASCHINEN GmbH  www.zipper-maschinen.at
Motorsense / brush cutter ZI-MOS145G
All manuals and user guides at all-guides.com
W A R N I N G
Maintenance tasks
Daily before starting
Daily before starting
Daily before starting
Daily before starting
Daily before starting
Every 25 working hours
Every 20-30 working hours
N O T E
MAINTENANCE
Seite 36
Seite 36