Remaining Risk Factors - Zipper Mowers ZI-MOS145G Originalbetriebsanleitung

13.3

Remaining risk factors

Working with a brush cutter always poses some risks that cannot be eliminated entirely:
 Noise: Working for a long time can damage your hearing if you do not have a very good
hearing protection.
 Risks of injury:
Be aware that the cutter might stall and lead you to fall.
Small objects might be caught by the machine and catapulted into the air.
The contact with the rotating moving cutter causes severe injuries! Protect especially your
feet by wearing reinforced security shoes.
Never get with your fingers or hands near the rotating moving cutter.
Do not touch the muffler or other machine components during operation – They become hot!
 Risk to the hands or fingers:
Access while it is working in the mowing apparatus. After the operation, the machine must
cool down. Otherwise, there is an acute risk of scalding!
ZIPPER MASCHINEN GmbH  www.zipper-maschinen.at
Motorsense / brush cutter ZI-MOS145G
All manuals and user guides at all-guides.com
Do not operate in an enclosed or confined areas.
Exhaust contains poisonous carbon monoxide. The exposure can
cause unconsciousness and death.
Before the start, after the failure or shock, be sure to check the
device and make sure that it is in good condition.
Wear firm gloves when you use the brush cutter or if you install or
remove the cutting blade.
TRANSPORT NOTES:
 Switch off the engine
 Fit the blade guard
 Secure the machine
 Empty tank completely, avoid fuel spillage
 To avoid damage to the device never drag but always lift
correctly.
STORAGE NOTES:
 Remove and clean thread head and cutter blade
 Fit the blade guard
 Clean the machine and dry
 Empty Tank completely, avoid fuel spillage
 Store in a dry, out of reach of children place, well packaged
(protection against cuts)
SAFETY
Seite 29
Seite 29