Zipper Mowers ZI-MOS145G Originalbetriebsanleitung Seite 28

ZIPPER MASCHINEN GmbH  www.zipper-maschinen.at
Motorsense / brush cutter ZI-MOS145G
All manuals and user guides at all-guides.com
WARNING: Gasoline is highly flammable!
Smoking and open flames are prohibited during refuelling. Do not
refuel when the engine and carburettor are still very hot.
Refuel only outdoors or in a well ventilated area.
Avoid contact with skin and clothes (fire hazard).
Check after refuelling tank cap and check for leaks.
Start the engine at least 3 meters from the tank location.
Spilled fuel is wipe immediately.
Work attentively, safety conscious and always be fully aware safe
stand when working! Caution on uneven work surfaces and work
surfaces with a slope!
Never cutting:
 above hip height
 on a ladder
 on trees
Regular breaks reduce the security risk to loss of control due to
fatigue. Change the working position over again.
Avoid abnormal posture.
At idle, the blade should not rotate!
The maximum shaft speed must not exceed the specified speed.
Checked settings!
No other person shall remain within 15m!
This distance also adhere to things!
Danger of damage!
Solid objects, stones, metal parts, or the like can be thrown out -
risk of injury!
Use personal safety equipment: ear protectors, safety goggles,
safety shoes and safety helmet when working with the machine
Never leave the machine running unattended! Before leaving the
working area switch the machine off and wait until the machine
stops.
Switch off the machine before maintenance or adjustment.
Storage always with an empty tank in a safe place.
Do not grab in the cutting tool while it is rotating.
Take care that you do not get under the cutting tool!
Always use the correct cutting tool for the work to be done.
SAFETY
Seite 28
Seite 28