KERN KFC-TM Betriebs Und Installationsanleitung Seite 99

10.2.7 Application units
When selecting an application unit (%, Pcs, FFA), the required settings can be
selected right after being invoked, using the
Setting example „Percent weighing":
In weighing mode press the
starts flashing
button to select the unit „%".
Use
Place a reference weight which corresponds to 100 %,
and confirm by
"Wait" is shortly displayed.
Confirm the flashing weight value of the reference weight
using button.
From now on the weight of the sample will be shown in
percent based on the reference weight.
TKFC-TM-A-BA_IA-e-2212
button until the display
.
button.
33