Cleaning & Maintenance - Inventum PW820BG Gebrauchsanleitung

| errors
If the scale detects an error during weighing, «Err»
appears in the display.
possible causes of errors
The scale was not activated
before stepping on.
When you stand on the scale
before "0.0" appeared in the
display, it will not operate
correctly.
The maximum load-bearing
capacity of 150 kg (330 lbs) was
exceeded.
You were not standing still on
the scale.
The electrical resistance between
the electrodes and the soles of
your feet is too high (e.g. with
heavily callused skin).
Your body fat lies outside the
measurable range (less than 5% or
greater than 50%).
Your percentage of water lies
outside the measurable range (less
than 25% or greater than 75%).
The percentage of muscle lies
outside the measurable range
(depending on age and sex).
And remember: Physical exercise is the basis for a
healthy body.
| convert kg/st/Lb
This scale can display measurements in kilograms, stones
and pounds. You can set this with the switch on the
bottom of the scale. Kg (kilograms), St (Stone) or Lb
(pounds).
| cLeAning & mAintenAnce
Wipe the scale only with a damp cloth. never immerse
the scale in water or any other liquids. Handle the scale
with care, protect the scale from impact with hard object
and do not drop it.
remedy
Activate the scale the right way
and repeat the measurement.
Only weigh the maximum
permissible weight.
Stand still during the measure-
ment.
repeat weighing barefoot. Slightly
moisten the soles of your feet if
necessary. remove the calluses on
the soles of your feet if necessary.
repeat weighing barefoot. Slightly
moisten the soles of your feet if
necessary.
repeat weighing barefoot. Slightly
moisten the soles of your feet if
necessary.
repeat weighing barefoot and
slightly moisten the soles of your
feet if necessary.
23