Küppersbusch IKE326-0-2T Benutzerinformation Seite 28

28
Ha
Hc
9. Install the part (Ha) on the inner side of
the kitchen furniture.
ca. 50 mm
ca. 50 mm
10. Push the part (Hc) on the part (Ha).
Hc
11. Open the appliance door and the kitch-
en furniture door at an angle of 90°.
Insert the small square (Hb) into guide
(Ha).
Downloaded from Fridge-Manual.com Manuals
All manuals and user guides at all-guides.com
Hb
Hd
90°
21 mm
90°
21 mm
Ha
Put together the appliance door and
the furniture door and mark the holes.
8 mm
Hb
12. Remove the brackets and mark a dis-
tance of 8 mm from the outer edge of
the door where the nail must be fitted
(K).
8 mm
13. Place the small square on the guide
again and fix it with the screws sup-
plied.
Align the kitchen furniture door and the
appliance door by adjusting the part
(Hb).
Ha
K
Ha