Calibration; Maintenance; Disposal Or Waste - purel PTS+20 Gebrauchs- Und Montageanleitung

10 Calibration

The instrument is calibrated ex work. The exact calibration date is
printed on the certificate that is supplied together with the instrument .
The accuracy of the instrument is regulated by the on-site conditions,
and parameters such as oil, high humidity, and other impurities can
affect the calibration and furthermore the accuracy. Therefore we
recommend you calibrate the instrument at least once per year. The
calibration is excluded from the instrument warranty. Please contact
pure! GmbH for details.

11 Maintenance

Please observe from time to time the sinter cap. If it appears to be
dirty, it is recommended to replace it for this please contact pure!
GmbH.
ATTENTION!
Contaminated filters can lead to longer response
time and to wrong measurements.

12 Disposal or Waste

Electronic devices are recyclable material and do not
belong in the household waste.
The device, the accessories and its packings must be
disposed according to your local statutory requirements.
The dispose can also be carried by pure! GmbH, for this
please contact pure! GmbH.
20
10 Calibration
PTS+20/-100