Maintenance; Environmental Protection - Felisatti JS100/18L Originalbetriebsanleitung

Disconnect the plug from the power supply before making maintenance.
1. Check cutter blade
Use of worn cutter blade may cause damage to motor and decrease work efficiency.
Compensate or replace with new cutter blade immediately.
Use of extremely dull cutter blade may cause personal injury due to the
kickback during cutting operation. Replace the cutter blade that its cutting
performance is decreased with new one.

2. Environmental Protection

The tool and its accessories contain much raw materials and plastics that can be recycled
after their life. Therefore, plastic parts are indicated are indicated with their material types
so that they can be classified and recycled for each material type.
3. What to do when the tool does not work normally
It is very dangerous for customers to troubleshoot or repair the tool for themselves.
Contact the nearest A/S center (sales agency) and request for a service.
The repair shall be requested to the qualified electric specialist.
4. Y attachment cord
If the replacement of the supply cord is necessary. this has to be done by the
manufacturer or his agent in order to avoid a safety hazard.
8

Maintenance

19