Beurer IPL 8800 Velvet Skin Pro Gebrauchsanweisung Seite 28

• Protect batteries from excessive heat.
• Risk of explosion! Never throw batteries into a fire.
• Do not disassemble, open or crush the batteries.
• Only use chargers specified in the instructions for use.
• Batteries must be charged correctly prior to use. The instructions from the manufacturer and the spe-
cifications in these instructions for use regarding correct charging must be observed at all times.
• Fully charge the battery prior to initial use.
• In order to achieve as long a battery service life as possible, fully charge the battery at least twice per
year.
IMPORTANT
To prevent damage
• Do not attempt to open or repair your beurer Velvet Skin Pro device. Attempting to open the beurer
Velvet Skin Pro can damage the device and invalidates your warranty.
• During use, do not expose the device to temperatures below 10 °C or above 40 °C.
• The device should never be left unattended when the mains part is plugged into a socket.
• Only use the beurer Velvet Skin Pro for its intended purpose and as described in the instructions
for use.
• Do not operate the beurer Velvet Skin Pro if a cable or plug is damaged and keep the mains cable
away from hot surfaces.
• Pull the mains plug of the beurer Velvet Skin Pro out of the socket before cleaning.
• Pull the mains plug out of the socket after charging the battery.
• Do not use the beurer Velvet Skin Pro with attachments or accessories that are not recommended
by Beurer GmbH.
• Do not use the beurer Velvet Skin Pro if you see or smell smoke while using the device.
• Do not use the beurer Velvet Skin Pro if it is not working properly or if it appears to be damaged.
• Do not use the beurer Velvet Skin Pro if the skin colour sensor under the light area is cracked or broken.
• Do not use the beurer Velvet Skin Pro if the exterior housing is cracked or falling apart.
• Do not use the beurer Velvet Skin Pro if the light area is cracked, broken or missing.
• Do not operate the beurer Velvet Skin Pro if the cable or plug is damaged.
• Only charge the device with the supplied adapter.
• Do not use the device if the UV filter of the light emission window is damaged.
• Do not use the precision attachment if the filter is damaged.
• Make sure that an unimpeded flow of air through the ventilation holes is ensured.
WARNING
Do not use the beurer Velvet Skin Pro under any circumstances if you suffer from one of the fol-
lowing ailments:
• If you suffer from skin cancer or have done in the past.
• If you suffer from epilepsy.
• If you suffer from keloid scars.
• If you have herpes or psoriasis.
• If you are photosensitive or suffer from another form of light sensitivity, such as porphyria, poly-
morphic photodermatosis, solar urticaria, lupus, etc.
• If you suffer from a metabolic disorder, such as diabetes.
• If you suffer from a blood clotting disorder.
28