Arenti GO1 Handbuch Seite 7

Camera Using tips
• PIR Motion Sensor:
It will detect the body heat from 2~10 meters. And you can
customize the detection range to meet your needs. Set from
Arenti APP >> Device (tap device to live video page) >>
Settings >> Alert settings >> Motion Detection >> Sensitiv-
ity.
Sensitivity
Level 1-3 (Low)
Level 4-7 (Mid)
Level 8-10 (High)
For more accuracy of human detection. You can set human
shape detection on to filter useless alarms. Enable it for day
or night human shape detection.
• Battery Life:
The battery life of the camera depends on the number of
times that the camera is triggered. The more times the
camera is triggered to work, the faster the battery will be
consumed.
Suggest:
1. Place the camera in a working environment with a smooth
and stable WIFI
2. Not to install the camera on the side of the road, not point
to the heat source similar to an outside air conditioner or
face the sun's rays to avoid frequent false triggering of PIR.
3. Set lower sensitivity and long alarm interval in Arenti APP.
FAQ
• My camera was triggered (blue is on and motion detection
is on), but there is no alert notification?
Please try to disable Day/Night Human Shape Detection. If
enabled, it will send an alert only when recognized the
human shape, but the arithmetic is not 100% accurate;
Especial at the night, camera may think that's not a human
shape and didn't record and send notification.
Detection range
Up to 2-5 meters
Up to 5-8 meters
Up to 8-10 meters
EN
EN EN