Deactivating Automatic Reopening - Cherub A520012 MISTRAL Einstellanleitungen

Following a wind alarm, the motor closes automatically the awning, overriding user
commands until the wind alarm passes (8 minutes). If the automatic reopening function
is active, after 8 minutes the awning returns to the position it was before the alarm. This
waiting time is set to ensure the awning protection and to prevent continuous motor
movement in the event of sporadic gusts of wind.
With the automatic reopening system, at the end of the wind alarm, the awning opens
again. From factory this function is not activated in the motor, but can be easily activated
with the following command sequence:
Tn: Already programmed remote control
+
A B
Tn

DEACTIVATING AUTOMATIC REOPENING

The automatic reopening function can be deactivated at any moment with the following
command sequence:
+
A B
Tn
To delete the Mistral sensor from the motor, an already programmed remote control must
be used. The deleting sequence is the following:
+
A B
Tn
AUTOMATIC REOPENING
- only with Wave RX and Senso RX motors -
ACTIVATING AUTOMATIC REOPENING
C
C
DELETING THE SENSOR
Tn
Tn
A
Tn
26
C
Tn (2 sec)
A
Tn (2 sec)
set
2 sec