Product Description - Concept RK 2041 Bedienungsanleitung

PRODUCT DESCRIPTION

Switch
1 1
2 2 Signaling light
3 3 Lid
4 4 Lid closure
5 5 Sink with filter
6 6 Handle
Base with electric cable
7 7
INSTRUCTION MANUAL
The electric kettle is designed for fast heating of water.
Comparing to usual water heating, the kettle save electric
energy. The heating element is built in appliance body
and it is not in contact with heated water inside of kettle.
The water remains clean and lifetime of heating element
is longer.
1. Fill the kettle with cold water - up to the maximal
level.
2. Plug the base to the mains (see rating plate).
3. Stand the kettle on the base - the electric contacts
are automatically connected.
4. Switch on the kettle by pushing the button into the
position I. It is possible to turn the kettle in range of 360°, it can be stand on the
base from any side (see fig.).
5. The function of kettle is signalized by signaling light on the body of the appliance.
When the water is heated, the lid has to be closed.
6. When the heating is finished, the kettle will automatically switch off - the signaling
light is off.
7. Take off the kettle out of the base. You ca use the water.
8. Unused water can be reheated by pushing the switch into the position I.
9. Be careful during the pouring out of hot water - the could be opened by flowing
water.
10. The filter catches all impurities when the water is poured out.
RK 2041
4
5
7
2
UK
3
1
360°
fig. 1
17