Pelgrim GVW260XL Gebrauchsanleitung Seite 66

Table continued from last page
Problem
Grease deposits in the dish-
washer.
The dishes are not dry enough.
30
Possible causes
Low temperature programs
have been selected for a pro-
longed period.
The Auto open option is not ac-
tivated.
The dishwasher is not fully
loaded.
Rinse aid needs topping up or
dosage is set too low.
3-in-1/ All-in-one detergent is
used and the setting TAB (3-in-
1/ All-in-one detergent) is activ-
ated.
Action
Select a program with a high
temperature to dissolve grease
on very dirty dishes, such as In-
tensive wash. Or run a self-
cleaning program. See Self-
cleaning program in the chapter
Using the dishwasher.
Activate the Auto open option.
Fully load the dishwasher.
Top up with rinse add or in-
crease the rinse aid dosage.
See the sections Before wash-
ing for the first time and Set-
tings.
Inactivate the setting TAB (3-in-
1/ All-in-one detergent) and top
up salt and rinse aid.