Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
EN 10
• If you want this signal to appear again when the charcoal filter
needs to be cleaned, then you have to reactivate the signal; turn off
the extractor hood with the on/off button, and then press the fan
button and light button at the same time for at least three seconds.
You will see the numbers '1' and '2' flashing alternately in the
display for two seconds. The signal will then start flashing the next
time the charcoal filter needs to be cleaned.
• If you do not want this signal to appear again when the charcoal
filter needs to be cleaned, you can deactivate the signal; turn off
the extractor hood with the on/off button, and then press the fan
button and light button at the same time for at least three seconds.
The number '1' will flash in the display for two seconds. The signal
when the charcoal filter needs to be cleaned will no longer appear.
Werbung
Inhaltsverzeichnis
