Setting The Time Manually - ADE CK 2301 Bedienungsanleitung

4. Manually perform settings if reception is not
possible at your location, see "Setting the
time manually".

Setting the time manually

‚ If more than 20 seconds elapse between
‚ Each push of a button is confirmed
1. Keep the
appears on the display.
2. Use the button
(OFF = you will no longer hear a beep when you
press the button).
3. Press
The display shows TIME ZONE, and "00" flashes,
where "00" means your current time zone.
4. Use button
your current location ("00" is the default setting
for mainland Europe).
5. Proceed as described:
− Press the button
desired value.
− Press
6. Perform the following settings one after the
other:
CK 2301 DCF radio-controlled clock
two button presses, the setting process
is terminated automatically, and you
have to start over.
with a beep.
button pressed until BEEP ON
or
to save the setting.
or to select the time zone of
each time to save the setting.
to select ON or OFF
or to set the
37